This is the Hobbico Accu-Glo II Power Panel.
This panel powers starters, chargers, fuel pumps, and glow starters and monitors condition of glow plugs.
This power panel comes with a hard plastic case or can be mounted to any field box with a standard sized cutout for a power panel.

FEATURES:
Fuel pump switch from original Accu-Glo was replaced by separate color-coded push-buttons for "Fill" and "Empty" press once to start, again to stop. Four LEDs, 11.0V, 11.5V, 12.0V, and 12.5V indicate field battery condition-an improvement from one light that glowed either green or red on original version.
Glow Starter Charger keeps unit fully charged at a constant 300-400mA rate.
Automatic Glow Power Management section tells when glow plug is fully charged and if plug continuity is good. Adjustment dial allows automatic glow heat customization to the model; once set the unit maintains proper heat regardless of glow plug's condition.
Two year limited warranty

INCLUDES:
One Hobbico Accu-Glo II Power Panel with two alligator clips, two black and two red banana plugs, two plastic plug covers, four 3mm x 10mm self tapping screws to mount panel to field box.

SPECS:
Input Voltage: 11-13V DC
Input Voltage Indicators: Four LEDs
Starter Jacks-Output Voltage: 12V DC
Fuel Pump Controls: yellow "FILL" pushbutton; red "EMPTY" pushbutton
Glow Heat Power Circuit: Automatic heat adjustment
Glow Heat Status Indicators: "HOT" and "COLD" LEDs
Glow Heat Continuity Indicators: "GOOD and "BAD" LEDs
Glow Starter Charger Current: 300-400mA constant current (not timed)
Glow Starter Output Jack: Glow driver mounting lug with LED
Fuse: 7.5A spade type
Weight: 8.3oz (235g)
Dimensions: 6" x 3.7" (152 x 94mm)
REQUIRES: 12V battery, use HCAP0800

volver a la página inicial - volver a cargadores